Firmware & Downloads
Keep your HUGEROCK updated with the latest system and manuals.
X72 Official User Manual
X70 Official User Manual
X7 Official User Manual
PD70 Setup Guide & Manual
How to Install Firmware
Step 1
Download & Extract
Download the latest ZIP firmware file for your specific model and extract it to a folder on your Windows PC.
Step 2
Run Flashing Tool
Open the HUGEROCK Flashing Tool, load the scatter file from the extracted folder, and click "Download".
Step 3
Connect & Flash
Turn OFF your tablet completely. Connect it to your PC via USB-C. The flashing process will start automatically.
Critical Warning
Ensure your tablet has at least 50% battery before starting. Do NOT disconnect the USB cable during the flashing process, as this may permanently brick your device.
- Choosing a selection results in a full page refresh.
- Opens in a new window.